Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today, we will go through the main instructions for removing and replacing the spark plugs on the Benelli TRK 702. First, place the motorcycle on the centre stand and start by removing the rider's seat and the fuel tank, disconnecting the fuel lines and the electrical connector; then remove the air filter box. At this point, disconnect the spark plug coils using a socket wrench with an extension to unscrew and remove the two spark plugs; replace them with new original ones, screwing them in by hand and tightening gently with a wrench (preferably a torque wrench).

Posted on 28 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the motor oil in the Benelli TRK 702 X?
How to replace the motor oil in the Benelli TRK 702 X?
Trk 702x In this tutorial we can see how to replace the motor oil in the Benelli TRK 702 X, an extremely simple and quick operation. First of all, make sure t…
How to Install Heated Grips on a Benelli TRK 702 X
How to Install Heated Grips on a Benelli TRK 702 X
Trk 702x These brief and simple steps will guide you on how to remove and replace the grips with heated ones on the Benelli TRK 702 X motorcycle. First, place…
How to replace the engine oil and oil filter of the Benelli TRK 702X
How to replace the engine oil and oil filter of the Benelli TRK 702X
Trk 702x In a few simple steps, we will see the instructions that will show us how to replace the motor oil and oil filter, performing the routine maintenance…

How to replace the headlight bulbs on a Suzuki GSXR 600?

In this tutorial, you will see how to replace the headlight bulbs on a Suzuki GSXR 600, an extremely simple and quick operation. First, ensure that the key is not inserted, then unscrew the two indicated screws and separate the dashboard from the support. Next, disconnect the power connectors of the bulbs, remove the rubber caps, and unclip the metal clips to extract the bulbs from their respective housings. At this point, you can insert the replacements, avoiding touching the glass directly with your bare hands, and follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos