Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Exhaust on the Benelli TRK 702X?

Model: Benelli Trk 702x
Part: Exhaust muffler

Video tutorial

You can replace the exhaust on the Benelli TRK 702X by loosening the screws that secure the exhaust end can to its housing, located near the rear mudguard on the right side of the bike: once the fixing screws of the supports have been loosened, you can proceed by widening the connecting clamp between the exhaust and the collector.

At this point, remove the old exhaust end can and replace it with a new one: this can now be secured with screws and connected to the collector to ensure everything is functioning.


Posted on 15 October 2026 by ScegliAuto


Related tutorials

How to replace the engine oil and oil filter of the Benelli TRK 702X
How to replace the engine oil and oil filter of the Benelli TRK 702X
Trk 702x In a few simple steps, we will see the instructions that will show us how to replace the motor oil and oil filter, performing the routine maintenance…
How to replace the motor oil in the Benelli TRK 702 X?
How to replace the motor oil in the Benelli TRK 702 X?
Trk 702x In this tutorial we can see how to replace the motor oil in the Benelli TRK 702 X, an extremely simple and quick operation. First of all, make sure t…
How to Replace the Spark Plugs on the Benelli TRK 702
How to Replace the Spark Plugs on the Benelli TRK 702
Trk 702x Today, we will go through the main instructions for removing and replacing the spark plugs on the Benelli TRK 702. First, place the motorcycle on the…

How to change the engine oil in the Yamaha TTR 125?

In this tutorial, see how to change the engine oil in the Yamaha TTR 125, a very simple and quick operation. Before doing this, wait for the engine to cool down sufficiently. Start by positioning a container under the bike, then locate the drain bolt and unscrew it using a socket spanner. Allow all the oil in the system to drain out, clean any residual dirt, and tighten the bolt. At this point, simply pour the required amount of oil through the designated upper hole.

Watch the video!


by ScegliAuto

More videos