Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In a few simple steps, we will see the instructions that will show us how to replace the motor oil and oil filter, performing the routine maintenance of the Benelli TRK 702X motorcycle. First, we put the motorcycle on the center stand and start unscrewing the oil drain bolt found under the engine, letting the oil drain into a container for about ten minutes; then we unscrew the oil filter cartridge, replacing it with a new one, as shown in the video. At this point, we unscrew the filler cap and top up with the new motor oil, then start the engine and top up again if necessary.

Posted on 15 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the motor oil in the Benelli TRK 702 X?
How to replace the motor oil in the Benelli TRK 702 X?
Trk 702x In this tutorial we can see how to replace the motor oil in the Benelli TRK 702 X, an extremely simple and quick operation. First of all, make sure t…
How to Replace the Spark Plugs on the Benelli TRK 702
How to Replace the Spark Plugs on the Benelli TRK 702
Trk 702x Today, we will go through the main instructions for removing and replacing the spark plugs on the Benelli TRK 702. First, place the motorcycle on the…
How to Install Heated Grips on a Benelli TRK 702 X
How to Install Heated Grips on a Benelli TRK 702 X
Trk 702x These brief and simple steps will guide you on how to remove and replace the grips with heated ones on the Benelli TRK 702 X motorcycle. First, place…

How to Replace the Rear View Mirror on a Honda Forza

To replace the rear view mirror on a Honda Forza, use a screwdriver to lever under the front cover of the fairing to detach it. Underneath, you will find the bolts securing the windscreen and its support: by removing these, you can access the screws holding the rear view mirror. Unscrew these screws and disconnect the connectors attached to the mirrors, allowing you to completely remove them and install the new ones: these must be connected to the connectors, positioned in their place, and secured with the appropriate bolts.

Watch the video!


by ScegliAuto

More videos