Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch on a KTM EXC 250?

Model: Ktm Exc 250
Part: Clutch

Video tutorial

The procedure for replacing the clutch on a KTM EXC 250 involves loosening the bolts that secure the clutch cover, which is located on the left side of the bike. Once the cover is removed, you can access the components underneath.

The clutch can be removed from its housing by loosening the screws that secure the discs in place. After removing the old clutch, you can insert the new one to ensure everything functions correctly.

Finally, cover it all with the clutch cover.


Updated on 22 August 2026 by ScegliAuto


Related tutorials

Replacing the Clutch on a KTM Exc 125 - 250
Replacing the Clutch on a KTM Exc 125 - 250
Exc 250 Today's guide will show you the main steps to remove and replace the clutch discs on the KTM Exc 125 and 250 enduro bike. First, unscrew the screws o…
How to Replace the Clutch on a KTM EXC 250?
Exc 250 To replace the clutch on a KTM EXC 250, lay the bike on its left side to access the components on the right side. At the bottom, you will find the co…
How to Replace the Clutch Master Cylinder on a KTM EXC 250
How to Replace the Clutch Master Cylinder on a KTM EXC 250
Exc 250 This guide will show you how to remove and replace the clutch master cylinder on the KTM EXC 250 enduro bike. First, place your bike on a stand and s…

How to Change the Engine Oil on a Benelli 150

To change the engine oil on a Benelli 150, ensure the bike is on a stable surface, using the centre stand to keep it upright. Before starting, it's helpful to run the engine for a few minutes to warm the oil and facilitate drainage. Turn off the engine and locate the drain plug situated under the engine. Using an appropriate spanner, loosen the plug and position a container underneath to collect the used oil. Allow it to drain completely, ensuring all the liquid is removed. Once emptied, carefully re-tighten the plug, avoiding overtightening. Using a funnel, slowly pour new oil into the tank, checking the level with the dipstick or inspection window. When the level is correct, start the engine for a couple of minutes to circulate the new oil, then turn it off and check the level again, topping up if necessary.

Watch the video!


by ScegliAuto

More videos