Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Clutch on a KTM Exc 125 - 250

Model: Ktm Exc 250
Part: Clutch

Video tutorial

Today's guide will show you the main steps to remove and replace the clutch discs on the KTM Exc 125 and 250 enduro bike. First, unscrew the screws on the clutch cover to remove it; then, unscrew the six screws of the clutch pack using a key or Torx screwdriver, as shown in the video.

At this point, you can remove each clutch disc one by one, replacing them with new original ones; insert them alternately and finally reassemble the clutch cover to complete the job!


Updated on 23 August 2026 by ScegliAuto


Related tutorials

How to Replace the Clutch Master Cylinder on a KTM EXC 250
How to Replace the Clutch Master Cylinder on a KTM EXC 250
Exc 250 .. replace the clutch master cylinder on the KTM EXC 250 enduro bike. First, place your bike on a stand and start unscrewing the fastening pins of the clutch.. …
How to Replace the Clutch on a KTM EXC 250?
How to Replace the Clutch on a KTM EXC 250?
Exc 250 .. procedure for replacing the clutch on a KTM EXC 250 involves loosening the bolts that secure the clutch cover, which is located on the left side of.. …
Guide to Replacing the Clutch of the KTM EXC-F 250
Guide to Replacing the Clutch of the KTM EXC-F 250
Exc 250 .. and replace the clutch discs of the KTM EXC-F 250 enduro bike. First, drain the engine oil by unscrewing the drain bolt found on the sump; then unscrew.. …

How to Change the Engine Oil on a Benelli 150

To change the engine oil on a Benelli 150, ensure the bike is on a stable surface, using the centre stand to keep it upright. Before starting, it's helpful to run the engine for a few minutes to warm the oil and facilitate drainage. Turn off the engine and locate the drain plug situated under the engine. Using an appropriate spanner, loosen the plug and position a container underneath to collect the used oil. Allow it to drain completely, ensuring all the liquid is removed. Once emptied, carefully re-tighten the plug, avoiding overtightening. Using a funnel, slowly pour new oil into the tank, checking the level with the dipstick or inspection window. When the level is correct, start the engine for a couple of minutes to circulate the new oil, then turn it off and check the level again, topping up if necessary.

Watch the video!


by ScegliAuto

More videos