Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Clutch of the KTM EXC-F 250

Model: Ktm Exc 250
Part: Clutch

Video tutorial

In this brief and simple guide, discover the instructions to dismantle and replace the clutch discs of the KTM EXC-F 250 enduro bike. First, drain the engine oil by unscrewing the drain bolt found on the sump; then unscrew the screws of the clutch cover to remove it, as illustrated in the video.

Next, unscrew the screws of the clutch pack to extract the discs; replace them with new ones, alternating cork and metal discs, following the video tutorial to the end!


Updated on 13 May 2026 by ScegliAuto


Related tutorials

How to Replace the Clutch on a KTM EXC 250?
How to Replace the Clutch on a KTM EXC 250?
Exc 250 The procedure for replacing the clutch on a KTM EXC 250 involves loosening the bolts that secure the clutch cover, which is located on the left side …
How to Replace the Clutch on a KTM EXC 250?
How to Replace the Clutch on a KTM EXC 250?
Exc 250 To replace the clutch on a KTM EXC 250, loosen the screws securing the plastic cover on top of the clutch casing. Once the cover is removed, you can …
Replacing the Clutch on a KTM Exc 125 - 250
Replacing the Clutch on a KTM Exc 125 - 250
Exc 250 Today's guide will show you the main steps to remove and replace the clutch discs on the KTM Exc 125 and 250 enduro bike. First, unscrew the screws o…

How to Change the Engine Oil on a Benelli 150

To change the engine oil on a Benelli 150, ensure the bike is on a stable surface, using the centre stand to keep it upright. Before starting, it's helpful to run the engine for a few minutes to warm the oil and facilitate drainage. Turn off the engine and locate the drain plug situated under the engine. Using an appropriate spanner, loosen the plug and position a container underneath to collect the used oil. Allow it to drain completely, ensuring all the liquid is removed. Once emptied, carefully re-tighten the plug, avoiding overtightening. Using a funnel, slowly pour new oil into the tank, checking the level with the dipstick or inspection window. When the level is correct, start the engine for a couple of minutes to circulate the new oil, then turn it off and check the level again, topping up if necessary.

Watch the video!


by ScegliAuto

More videos