Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
As we can see in this video, changing the spark plug of the Suzuki Burgman is a rather simple operation. Using an Allen key, we open the side shelf to access the spark plug, removing the cover located between the footrest and the underseat compartment. The spark plug is inside the engine, and as we can see in the video, it is certainly visible but not as easily accessible as one might think. To reach it, it is necessary to use a special key with an extension, and we must be very careful not to drop it inside, both when we remove it and when we position the new one.

Posted on 12 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Spark Plug on the Suzuki Burgman 125
How to Replace the Spark Plug on the Suzuki Burgman 125
Burgman 125 Today, we will look at the instructions for removing and replacing the spark plug on the Suzuki Burgman 125 scooter. First, place the scooter on the …
How to Replace the Spark Plug on a Suzuki Burgman Scooter?
How to Replace the Spark Plug on a Suzuki Burgman Scooter?
Burgman 125 As shown in this tutorial, removing the spark plug on the Suzuki Burgman UH125 scooter to clean or completely replace it is an extremely simple and q…
How to change the engine oil on a Suzuki Burgman 125 scooter?
How to change the engine oil on a Suzuki Burgman 125 scooter?
Burgman 125 In this tutorial, you will see how to change the engine oil on a Suzuki Burgman 125 scooter, an extremely simple and quick operation. First, wait unt…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos