Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install the Lower Engine Cover on a Benelli Leoncino 500

Model: Benelli Leoncino 500

Video tutorial

Today, we will discover the instructions that will allow us to install the lower engine protection cover on the Benelli Leoncino 500 motorcycle. First, place the motorcycle on its stand and begin to position the cover on the engine, ensuring that the screws align correctly with the holes; install and securely fasten all screws in a cross pattern, as shown in the video.

The metal shield should not protrude excessively from the engine, as this could compromise the safety and road holding of the vehicle; the lower shield is useful in off-road conditions.


Posted on 11 October 2026 by ScegliAuto


Related tutorials

How to Replace the Battery in a Benelli Leoncino 500?
How to Replace the Battery in a Benelli Leoncino 500?
Leoncino 500 In this tutorial, we will see how to replace the battery in a Benelli Leoncino 500, a very simple and quick operation. First, ensure that the instrum…
How do you replace the spark plugs of the Benelli Leoncino 500?
How do you replace the spark plugs of the Benelli Leoncino 500?
Leoncino 500 In order to replace the spark plugs of the Benelli Leoncino 500, you need to completely remove the fuel tank from its housing, along with the seat: t…
How do you replace the motor oil of the Benelli Leoncino 500?
How do you replace the motor oil of the Benelli Leoncino 500?
Leoncino 500 It will be possible to perform the oil change of the Benelli Leoncino 500 by loosening the drain plug located in the central lower part of the vehicl…

How to Change the Engine Oil on a Piaggio Vespa 125 LX Scooter

As shown in this tutorial, changing the engine oil on a Piaggio Vespa 125 LX scooter is a very simple and quick operation. First, wait for the engine to cool down sufficiently for safety. Then, place a container underneath and remove the top cap of the crankcase. Next, locate the drain bolt, unscrew it using a 24mm spanner, and let all the oil drain from the system. At this point, proceed to replace the filter, reassemble everything, and add the necessary amount of oil through the top hole.

Watch the video!


by ScegliAuto

More videos