Do it yourself
Frequently asked questions about cars and motorcycles
To replace the rear brake pads of the Moto Guzzi Nevada 750, you will need to loosen the screws that secure the brake caliper corresponding to its housing, near the disc: once the caliper has been detached, you can proceed by removing the pin that locks the pads inside its seat. The new pads can now be inserted and secured with the corresponding pin: after installing the pads, you can reposition the caliper on the disc, securing it with the appropriate screws and checking that everything is functioning properly.

Posted on 6 March 2025 by ScegliAuto

Video tutorial

Related tutorials

Nevada 750 In order to replace the air filter of the Moto Guzzi Nevada 750, you need to loosen the screws that secure the fuel tank to its housing at the front …
Nevada 750 Below are the main instructions for carrying out routine maintenance, which includes valve adjustment, spark plug replacement, brake pad change, and …
Nevada 750 To replace the oil in the bevel gear of our Moto Guzzi Nevada 750, first of all, we make sure that the engine is cold. Then, we lift the motorcycle o…

How to Service the Beta RR 350

This video will illustrate the steps to perform the routine maintenance service, replacing the engine oil and oil filter on the Beta RR 350 enduro bike. First, place the bike on a stand and start by loosening the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then clean the small oil filter (replacing it with a new one if too dirty). Finally, top up with new oil, of the correct type for your engine, filling to the maximum level!

Watch the video!


by ScegliAuto

More videos