Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Below are the main instructions for carrying out routine maintenance, which includes valve adjustment, spark plug replacement, brake pad change, and fluid replacement for the Moto Guzzi Nevada 750. First, place the bike on its centre stand and begin unscrewing the screws of the cylinder head cover to remove it; use a feeler gauge to adjust the valve clearance. Next, check or replace the brake pads; finally, replace the engine oil, gearbox oil, and brake fluid, as well as the coolant!

Updated on 28 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to change the oil of the bevel gear of a Moto Guzzi Nevada 750?
How to change the oil of the bevel gear of a Moto Guzzi Nevada 750?
Nevada 750 To replace the oil in the bevel gear of our Moto Guzzi Nevada 750, first of all, we make sure that the engine is cold. Then, we lift the motorcycle o…
How do you replace the air filter of the Moto Guzzi Nevada 750?
How do you replace the air filter of the Moto Guzzi Nevada 750?
Nevada 750 In order to replace the air filter of the Moto Guzzi Nevada 750, you need to loosen the screws that secure the fuel tank to its housing at the front …
How to Adjust the Valves on the Moto Guzzi Nevada 750
How to Adjust the Valves on the Moto Guzzi Nevada 750
Nevada 750 Today, in this brief and simple guide, you will learn the steps to adjust the valve clearance on the Moto Guzzi Nevada 750. First, place your motorcy…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos