Do it yourself
| ||||
|
Model: Husaberg Fe 390
The procedure for replacing the fuel pump on the Husaberg FE 390 involves loosening the screws that secure the seat to its housing and the screws located in the front side parts of the vehicle. By removing these parts, it will be possible to unscrew the screws and disconnect the tubes that attach the tank to the front part of the vehicle. Underneath it, the fuel pump can be located, which will need to be freed from its housing by loosening its fastening screws and replacing it with a new spare part. After the replacement, it will be possible to reassemble everything to verify that the system is functioning.
Posted on 12 September 2023 by ScegliAuto
|
Replacing the rear tire of the Yamaha Tracer 900We see in this guide the main steps that will allow us to remove and replace the rear wheel and tire of the Yamaha Tracer 900 motorcycle. First we put the central stand on our bike and start by unscrewing the central pin of the rear wheel, using a socket wrench. ; then we remove the brake caliper from the disc and disconnect the drive chain, as shown in the video. At this point we remove the air from the tire and replace it with the new one, having the same measures; we apply the reverse procedure for reassembly! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.013
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |