Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Spark Plug on Benelli TNT 300

Model: Benelli Tnt 300
Part: Spark plugs

Video tutorial

In this video, you will learn how to remove and replace the spark plug on a Benelli TNT 300 motorcycle. First, remove the rider's seat and unscrew the lower and upper screws of the fuel tank to remove it; then disconnect the electrical connector of the fuel level sensor and the fuel hose.

At this point, disconnect the spark plug lead and use a socket spanner with an extension to unscrew and remove it; finally, replace it with a new one of the correct type, screwing it in by hand before tightening with a spanner (preferably a torque wrench)!


Updated on 12 April 2026 by ScegliAuto


Related tutorials

Replacing the Spark Plug of the Benelli TNT 300
Replacing the Spark Plug of the Benelli TNT 300
Tnt 300 Let’s briefly go over the instructions needed to remove and replace the engine spark plug of the Benelli TNT 300 motorcycle. First, place the bike on…
How to Replace the Spark Plugs on a Benelli TNT 300
How to Replace the Spark Plugs on a Benelli TNT 300
Tnt 300 This brief guide provides instructions on how to remove and replace the spark plugs on a Benelli TNT 300 motorcycle. First, place the motorcycle on a…
How to Replace Engine Oil on a Benelli Tnt 300 Motorcycle
How to Replace Engine Oil on a Benelli Tnt 300 Motorcycle
Tnt 300 How to replace the engine oil on a Benelli Tnt 300 motorcycle? Follow these steps. Position the motorcycle on the centre (side) stand, unscrew the oi…

How to Change the Engine Oil in a Suzuki DR 350?

In this tutorial, you will see how to change the engine oil in a Suzuki DR 350, a very simple and quick operation. First, wait until the engine is cold enough, then remove the protective frame located at the bottom. Next, position a container underneath the bike, disconnect the indicated hose, and let all the oil in the system drain out. Then, open the filter housing by unscrewing the three bolts with an 8mm spanner, remove the old filter, and insert the replacement. At this point, you can reassemble everything and pour in the new oil through the designated hole.

Watch the video!


by ScegliAuto

More videos