Do it yourself
Frequently asked questions about cars and motorcycles

How to Set the Time on a Benelli 502C

Model: Benelli 502c
Part: Clock

Video tutorial

Before you can begin, sit on the seat of your Benelli 502C. Start by activating the instrument panel and the onboard computer by turning the key in the ignition switch. Then, press the button near the ignition button until the time starts to flash.

At this point, enter the correct hours and minutes, then confirm with the same button. Once you have completed this last step, you will have successfully set the time on the onboard computer of your Benelli 502C.


Updated on 13 April 2026 by ScegliAuto


Related tutorials

502c This guide shows you how to modify and adjust the time on the Benelli 502C motorcycle in simple and quick steps. First, place your motorcycle on its …
502c To replace the exhaust on a Benelli 502C, loosen the screws securing the exhaust tip to its housing: this will be located near the rear wheel on the …
502c The seat of the Benelli 502C motorcycle is perhaps the easiest to remove. As we can see from the video, there are no screws or other fasteners holdin…

How to change the transmission oil on the Honda PCX 150 scooter?

In this tutorial, you will see how to change the transmission oil on the Honda PCX 150 scooter, a very simple and quick operation. First, ensure the engine is completely cold, then locate the three bolts at the end of the casing and position a container underneath them. Next, remove the two inner bolts using a 12 mm socket, clean them of any dirt, and allow all the oil in the system to drain out. At this point, tighten the lower bolt and, using a pump or syringe, add new oil through the upper hole.

Watch the video!


by ScegliAuto

More videos