Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Time on a Benelli 502C

Model: Benelli 502c
Part: Clock

Video tutorial

This guide shows you how to modify and adjust the time on the Benelli 502C motorcycle in simple and quick steps. First, place your motorcycle on its stand and turn on the instrument panel; then press and hold the button found on the right side of the handlebars, to the left of the red battery button, as shown in the video.

This will cause the time displayed on the instrument panel to start flashing; adjust the hours and minutes, then turn off the panel and check that the changes are saved!


Updated on 1 July 2026 by ScegliAuto


Related tutorials

How to Set the Time on a Benelli 502C
How to Set the Time on a Benelli 502C
502c Before you can begin, sit on the seat of your Benelli 502C. Start by activating the instrument panel and the onboard computer by turning the key in t…
How to Remove the Seat of the Benelli 502C
How to Remove the Seat of the Benelli 502C
502c The seat of the Benelli 502C motorcycle is perhaps the easiest to remove. As we can see from the video, there are no screws or other fasteners holdin…
How to Perform Routine Maintenance on the Benelli 502C
How to Perform Routine Maintenance on the Benelli 502C
502c In this short and simple guide, you will learn how to perform routine maintenance on the Benelli 502C motorcycle. First, place the motorcycle on a st…

How to Change the Engine Oil on a Benelli 150

To change the engine oil on a Benelli 150, ensure the bike is on a stable surface, using the centre stand to keep it upright. Before starting, it's helpful to run the engine for a few minutes to warm the oil and facilitate drainage. Turn off the engine and locate the drain plug situated under the engine. Using an appropriate spanner, loosen the plug and position a container underneath to collect the used oil. Allow it to drain completely, ensuring all the liquid is removed. Once emptied, carefully re-tighten the plug, avoiding overtightening. Using a funnel, slowly pour new oil into the tank, checking the level with the dipstick or inspection window. When the level is correct, start the engine for a couple of minutes to circulate the new oil, then turn it off and check the level again, topping up if necessary.

Watch the video!


by ScegliAuto

More videos