Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Perform Routine Maintenance on the Benelli 502C

Model: Benelli 502c
Part: Checks and maintenance

Video tutorial

In this short and simple guide, you will learn how to perform routine maintenance on the Benelli 502C motorcycle. First, place the motorcycle on a stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then replace both the engine oil and the oil filter.

Next, check the correct tension of the drive chain by adjusting it at the wheel nut; finally, check the brake fluid and coolant levels, and inspect the brake wear!


Updated on 22 September 2026 by ScegliAuto


Related tutorials

How to Set the Time on a Benelli 502C
How to Set the Time on a Benelli 502C
502c Before you can begin, sit on the seat of your Benelli 502C. Start by activating the instrument panel and the onboard computer by turning the key in t…
How to Replace the Spark Plugs of the Benelli 502C
How to Replace the Spark Plugs of the Benelli 502C
502c This guide provides the main instructions on how to remove and replace the spark plugs of the Benelli 502C engine. First, place the motorcycle on a s…
How to Replace the Air Filter on the Benelli 502C
How to Replace the Air Filter on the Benelli 502C
502c Today, we will discover how to remove and replace the air filter of the engine on the Benelli 502C motorcycle. First, place the motorcycle on a stand…

How to Change the Engine Oil on a Benelli 150

To change the engine oil on a Benelli 150, ensure the bike is on a stable surface, using the centre stand to keep it upright. Before starting, it's helpful to run the engine for a few minutes to warm the oil and facilitate drainage. Turn off the engine and locate the drain plug situated under the engine. Using an appropriate spanner, loosen the plug and position a container underneath to collect the used oil. Allow it to drain completely, ensuring all the liquid is removed. Once emptied, carefully re-tighten the plug, avoiding overtightening. Using a funnel, slowly pour new oil into the tank, checking the level with the dipstick or inspection window. When the level is correct, start the engine for a couple of minutes to circulate the new oil, then turn it off and check the level again, topping up if necessary.

Watch the video!


by ScegliAuto

More videos