Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
This guide shows how to replace the engine oil on the Benelli Leoncino 500. First, warm up the engine to facilitate the oil drainage. At this point, unscrew the oil tank cap and the drain plug located at the edge of the lower protective plate. Replace the oil filter, located at the front of the engine, using a strap wrench. Lubricate the seal of the new filter with oil and fill it with new oil. Refit the drain plug and start filling the tank. Run the engine at idle for a few minutes and finally check the oil level. Top it up to the level recommended by the manufacturer. The operation is complete.

Updated on 16 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the engine oil and oil filter of the Benelli Leoncino 500
How to replace the engine oil and oil filter of the Benelli Leoncino 500
Leoncino 500 In a short and simple way, we will see how to perform the routine maintenance service, replacing the engine oil and oil filter, of the Benelli Leonci…
Engine Oil and Oil Filter Replacement for the Benelli Leoncino 500
Engine Oil and Oil Filter Replacement for the Benelli Leoncino 500
Leoncino 500 The procedure for replacing the engine oil and oil filter on the Benelli Leoncino 500 is straightforward and quick, requiring no special tools. First…
How do you replace the motor oil of the Benelli Leoncino 500?
How do you replace the motor oil of the Benelli Leoncino 500?
Leoncino 500 It will be possible to perform the oil change of the Benelli Leoncino 500 by loosening the drain plug located in the central lower part of the vehicl…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos