Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Oil and Oil Filter of the Benelli Leoncino 500

Model: Benelli Leoncino 500
Part: Engine oil

Video tutorial

In this guide, you will learn how to perform the routine maintenance service by replacing the engine oil and oil filter of the Benelli Leoncino 500. First, place the motorcycle on the centre stand and begin to unscrew the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes.

Next, remove the screws from the oil filter cover, taking out and replacing the cartridge with a new one, as shown in the video.

At this point, top up with the new oil, pouring the correct amount, checking the level, and finally starting the engine!


Updated on 10 October 2026 by ScegliAuto


Related tutorials

Engine Oil and Oil Filter Replacement for the Benelli Leoncino 500
Engine Oil and Oil Filter Replacement for the Benelli Leoncino 500
Leoncino 500 The procedure for replacing the engine oil and oil filter on the Benelli Leoncino 500 is straightforward and quick, requiring no special tools. First…
How do you replace the motor oil of the Benelli Leoncino 500?
How do you replace the motor oil of the Benelli Leoncino 500?
Leoncino 500 It will be possible to perform the oil change of the Benelli Leoncino 500 by loosening the drain plug located in the central lower part of the vehicl…
How to Replace the Engine Oil and Oil Filter on Benelli Leoncino 500
How to Replace the Engine Oil and Oil Filter on Benelli Leoncino 500
Leoncino 500 This guide shows how to replace the engine oil on the Benelli Leoncino 500. First, warm up the engine to facilitate the oil drainage. At this point, …

How to Remove the Engine from the KTM XC-W 300?

To remove the engine from the KTM XC-W 300, loosen the bolts that secure it to its housing in the centre of the frame: once the support bolts are removed, proceed to loosen the bolts securing the exhausts and then disconnect all related connectors. At this point, remove the pin and ring that secure the piston to the connecting rod: you can now access the crankshaft and all other internal components. After any necessary replacement, reassemble the engine to ensure everything functions correctly.

Watch the video!


by ScegliAuto

More videos