Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
The procedure for replacing the engine oil and oil filter on the Benelli Leoncino 500 is straightforward and quick, requiring no special tools. First, place the motorcycle on a stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then unscrew the screws of the oil filter cover, removing and replacing the cartridge with a new one, as shown in the video. At this point, unscrew the filler cap and top up with the correct amount of oil!

Updated on 10 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil in the Benelli Leoncino 500?
How to Change the Engine Oil in the Benelli Leoncino 500?
Leoncino 500 To change the engine oil on the Benelli Leoncino 500, loosen the drain plug located at the central bottom of the vehicle: once it is unscrewed, all t…
How to Replace the Engine Oil and Oil Filter on Benelli Leoncino 500
How to Replace the Engine Oil and Oil Filter on Benelli Leoncino 500
Leoncino 500 This guide shows how to replace the engine oil on the Benelli Leoncino 500. First, warm up the engine to facilitate the oil drainage. At this point, …
How to Replace the Number Plate Holder on a Benelli Leoncino 500
How to Replace the Number Plate Holder on a Benelli Leoncino 500
Leoncino 500 To replace the number plate holder on a Benelli Leoncino 500, loosen the screws that secure it to its housing at the rear of the motorcycle: the scre…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos