Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To change the engine oil on the Benelli Leoncino 500, loosen the drain plug located at the central bottom of the vehicle: once it is unscrewed, all the used oil can flow into a suitably positioned container. Next to the drain plug, you will find the oil filter, which must be removed from its housing and replaced with a new one. After replacing it, top up the oil by pouring it into the upper part of the casing located on the left side of the vehicle.

Updated on 31 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the motor oil of the Benelli Leoncino 500?
How do you replace the motor oil of the Benelli Leoncino 500?
Leoncino 500 It will be possible to perform the oil change of the Benelli Leoncino 500 by loosening the drain plug located in the central lower part of the vehicl…
How to replace the engine oil and oil filter of the Benelli Leoncino 500
How to replace the engine oil and oil filter of the Benelli Leoncino 500
Leoncino 500 In a short and simple way, we will see how to perform the routine maintenance service, replacing the engine oil and oil filter, of the Benelli Leonci…
Engine Oil and Oil Filter Replacement for the Benelli Leoncino 500
Engine Oil and Oil Filter Replacement for the Benelli Leoncino 500
Leoncino 500 The procedure for replacing the engine oil and oil filter on the Benelli Leoncino 500 is straightforward and quick, requiring no special tools. First…

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos