Do it yourself
Frequently asked questions about cars and motorcycles
This video will illustrate the steps to perform routine maintenance by replacing the engine oil and oil filter of the Benelli TNT 125 motorcycle. First, place your motorcycle on the centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes. Then, unscrew the screws of the oil filter cover, removing and replacing the cartridge with a new one, as shown in the video. Finally, unscrew the fill screw and top up with the new oil!

Updated on 3 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Tnt 125 In this video, learn how to replace the engine oil and oil filter on a Benelli TNT 125, performing the regular maintenance service. First, warm up th…
Tnt 125 In this guide, we will discover the instructions that will allow us to carry out the routine maintenance service, replacing the engine oil and oil fi…
Tnt 125 The information below will show you how to perform the routine maintenance service by changing the engine oil and oil filter on a Benelli TNT 125 mot…

How to Remove the Engine from a KTM EXC 300?

To remove the engine from the KTM EXC 300, you need to take out the engine block from its housing by unscrewing the bolts that secure it to the supports. Once the engine block is removed, unscrew the bolts that secure the cylinder at the top, then proceed to remove the side casings. Underneath, you will find the piston and other internal components, such as the clutch. The necessary parts can now be replaced, and you can subsequently reassemble all the components that were removed earlier.

Watch the video!


by ScegliAuto

More videos