Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil and Oil Filter on a Benelli TNT 125

Model: Benelli Tnt 125
Part: Engine oil

Video tutorial

The information below will show you how to perform the routine maintenance service by changing the engine oil and oil filter on a Benelli TNT 125 motorcycle. First, place the motorcycle on its stand and begin by unscrewing the oil drain bolt located under the engine, allowing the fluid to drain into a container for about ten minutes.

Next, unscrew the screws of the oil filter cover, remove and replace the cartridge with a new one, as shown in the video. At this point, top up with new engine oil until it reaches the correct level!


Updated on 12 September 2026 by ScegliAuto


Related tutorials

Replace Engine Oil and Oil Filter on Benelli TNT 125
Replace Engine Oil and Oil Filter on Benelli TNT 125
Tnt 125 In this video, learn how to replace the engine oil and oil filter on a Benelli TNT 125, performing the regular maintenance service. First, warm up th…
How to Change the Engine Oil and Oil Filter on a Benelli TNT 125
How to Change the Engine Oil and Oil Filter on a Benelli TNT 125
Tnt 125 Engine oil, along with the oil filter, should always be replaced at regular intervals to ensure proper engine function; here’s how to service the Ben…
How to Change the Engine Oil and Oil Filter on a Benelli TNT 125
Tnt 125 Discover the necessary steps to perform routine maintenance by changing the engine oil and oil filter on a Benelli TNT 125 motorcycle. First, place t…

How to Change the Transmission Oil on a Piaggio Vespa GTS Scooter

In this tutorial, you will see how to change the transmission oil on a Piaggio Vespa GTS scooter, a very simple operation applicable to all engine sizes. First, wait until the engine is completely cold, then position a container underneath the transmission area and, using a 6 mm hex socket spanner, unscrew the drain plug. Allow all the oil contained in the casing to drain out, reinsert the plug, and add the necessary amount of oil through the upper hole. You can use a pump or a syringe to assist with this.

Watch the video!


by ScegliAuto

More videos