Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil and Oil Filter on a Benelli TNT 125

Model: Benelli Tnt 125
Part: Engine oil

Video tutorial

Engine oil, along with the oil filter, should always be replaced at regular intervals to ensure proper engine function; here’s how to service the Benelli TNT 125. First, place your motorcycle on the centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes.

Next, remove the screws from the oil filter cover, taking out and replacing the cartridge with a new one, as shown in the video.

Finally, top up with new oil suitable for your engine!


Updated on 2 August 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil and Oil Filter on a Benelli TNT 125
How to Change the Engine Oil and Oil Filter on a Benelli TNT 125
Tnt 125 The information below will show you how to perform the routine maintenance service by changing the engine oil and oil filter on a Benelli TNT 125 mot…
How to Replace the Engine Oil and Oil Filter on a Benelli TNT 125
How to Replace the Engine Oil and Oil Filter on a Benelli TNT 125
Tnt 125 In this guide, we will discover the instructions that will allow us to carry out the routine maintenance service, replacing the engine oil and oil fi…
How to Change the Engine Oil and Oil Filter on a Benelli TNT 125
Tnt 125 Discover the necessary steps to perform routine maintenance by changing the engine oil and oil filter on a Benelli TNT 125 motorcycle. First, place t…

How to Change the Transmission Oil on a Piaggio Vespa GTS Scooter

In this tutorial, you will see how to change the transmission oil on a Piaggio Vespa GTS scooter, a very simple operation applicable to all engine sizes. First, wait until the engine is completely cold, then position a container underneath the transmission area and, using a 6 mm hex socket spanner, unscrew the drain plug. Allow all the oil contained in the casing to drain out, reinsert the plug, and add the necessary amount of oil through the upper hole. You can use a pump or a syringe to assist with this.

Watch the video!


by ScegliAuto

More videos