Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil and Oil Filter on a Benelli TNT 125

Model: Benelli Tnt 125
Part: Engine oil

This video is currently unavailable

Discover the necessary steps to perform routine maintenance by changing the engine oil and oil filter on a Benelli TNT 125 motorcycle. First, place the motorcycle on its centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then unscrew the screws of the oil filter cover, replacing the small cartridge with a new one, as shown in the video.

At this point, unscrew the filler cap and top up with the appropriate oil!


Updated on 9 June 2026 by ScegliAuto


Related tutorials

Replace Engine Oil and Oil Filter on Benelli TNT 125
Replace Engine Oil and Oil Filter on Benelli TNT 125
Tnt 125 In this video, learn how to replace the engine oil and oil filter on a Benelli TNT 125, performing the regular maintenance service. First, warm up th…
How to Change the Engine Oil on the Benelli TNT 125
How to Change the Engine Oil on the Benelli TNT 125
Tnt 125 This guide will show you the procedure necessary for changing the engine oil during the regular maintenance service of the Benelli TNT 125. First, pl…
How to Change the Engine Oil and Oil Filter on a Benelli TNT 125
How to Change the Engine Oil and Oil Filter on a Benelli TNT 125
Tnt 125 The information below will show you how to perform the routine maintenance service by changing the engine oil and oil filter on a Benelli TNT 125 mot…

How to Change the Transmission Oil on a Piaggio Vespa GTS Scooter

In this tutorial, you will see how to change the transmission oil on a Piaggio Vespa GTS scooter, a very simple operation applicable to all engine sizes. First, wait until the engine is completely cold, then position a container underneath the transmission area and, using a 6 mm hex socket spanner, unscrew the drain plug. Allow all the oil contained in the casing to drain out, reinsert the plug, and add the necessary amount of oil through the upper hole. You can use a pump or a syringe to assist with this.

Watch the video!


by ScegliAuto

More videos