Do it yourself
Frequently asked questions about cars and motorcycles

How to Service the Benelli TNT 125

Model: Benelli Tnt 125
Part: Engine oil

Video tutorial

To ensure the engine operates correctly, you must regularly service the Benelli TNT 125, which involves changing the engine oil and oil filter. First, place the motorcycle on a stand and start by loosening the oil drain bolt located under the engine, allowing the oil to drain into a container for about ten minutes.

Next, unscrew the screws of the oil filter cover, found on the right, and remove and replace the cartridge with a new one. Finally, pour in the appropriate oil!


Updated on 9 July 2026 by ScegliAuto


Related tutorials

Tnt 125 Before you can begin, sit on the seat of your Benelli TNT 125. Start by activating the instrument panel by turning the key in the ignition switch, th…
Tnt 125 The engine oil and oil filter must be changed regularly to ensure the proper functioning of the engine; let’s see how to perform the routine maintena…
Tnt 125 To remove the engine from a Benelli TNT 125, loosen all the screws securing the seat to its housing, and unscrew the screws holding the side protecti…

How to Change the Transmission Oil on a Piaggio Vespa GTS Scooter

In this tutorial, you will see how to change the transmission oil on a Piaggio Vespa GTS scooter, a very simple operation applicable to all engine sizes. First, wait until the engine is completely cold, then position a container underneath the transmission area and, using a 6 mm hex socket spanner, unscrew the drain plug. Allow all the oil contained in the casing to drain out, reinsert the plug, and add the necessary amount of oil through the upper hole. You can use a pump or a syringe to assist with this.

Watch the video!


by ScegliAuto

More videos