Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Benelli
    3. :
  3. Trk 502
    4. : How to replace the rear brake pads on Benelli TRK 502?

Model: Benelli Trk 502
Part: Brake pads
How to replace the rear brake pads on Benelli TRK 502?

Replacing the rear brake pads on the Benelli TRK 502, as we can see in this tutorial, is an extremely simple and fast operation. Let's start by going in front of the brake in question, after which, using a Torx key, we unscrew the two caliper fixing bolts. We separate the latter from the fork, unscrew the single external nut and extract the pin. At this point we can remove the old pads, clean any residual dirt present in the braking system and position the spare parts. To put everything back together, simply follow the reverse procedure.


Posted on 9 June 2023 by ScegliAuto



Benelli TRK 502 rear brake pads replacement
Trk 502 Today we will see how to remove and replace the rear brake pads on a Benelli TRK 502 motorcycle, following these steps. First we go to unscrew the fi
How to replace the rear brake pads of the Benelli TRK 502.
Trk 502 Today we are going to see the necessary instructions that will allow us to disassemble and replace the rear brake pads of the Benelli TRK 502 motorcy
How do you change the brake pads of the Benelli TRK 502?
Trk 502 In order to replace the brake pads of the Benelli TRK 502 you must first disassemble the speed sensor by removing the bolt and disconnecting the corr

How to replace the starter motor on the Ktm XC 250

In this video tutorial we will see the instructions on how to disassemble and replace the starter motor of the Ktm XC 250 two-stroke enduro motorcycle. First of all we go to remove the plastic cover that we find on the left of the engine, unscrewing all the screws, in order to access the starter motor; then we are going to unscrew the additional screws of the starter motor, disconnecting the electrical connector to remove it and replace it with the new one, as shown in the video. At this point we are going to install the new starter motor, applying the reverse procedure of the disassembly!

Watch the video!


by ScegliAuto

More videos