Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Below are the instructions that will allow you to remove and replace the spark plugs on the Benelli TNT 600 engine. First, place the motorcycle on a stand and begin by removing the passenger and rider seats; then unscrew the screws from the fuel tank, disconnecting the fuel line and the electrical connector, as shown in the video. At this point, remove the electrical connectors from the spark plugs using a socket wrench with an extension to unscrew and remove them; install the new original spark plugs, screwing them in by hand before tightening with a wrench.

Updated on 24 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Handlebars on a Benelli TNT 600
How to Replace the Handlebars on a Benelli TNT 600
Tnt 600 Follow these instructions to remove and replace the handlebars on your Benelli TNT 600 motorcycle. First, place the bike on a stand and start by remo…
How to Replace the Clutch of the Benelli TNT 600
How to Replace the Clutch of the Benelli TNT 600
Tnt 600 Today's guide will show you the steps to remove and replace the clutch discs of the Benelli TNT 600 motorcycle. First, place your motorcycle on a sta…
How to Replace the Rev Sensor on a Benelli TNT 600
How to Replace the Rev Sensor on a Benelli TNT 600
Tnt 600 This guide provides instructions on how to remove and replace the engine rev sensor on a Benelli TNT 600 motorcycle by following these simple steps. …

How to Remove the Final Drive from a BMW R 1200 GS?

To remove the final drive from a BMW R 1200 GS, loosen the bolts securing the exhaust so it can be removed along with the rear wheel. The rear wheel will also be removed by unscrewing the five bolts that secure it to the swingarm. Next, detach the brake caliper by unscrewing the mounting bolts and remove the rear part of the swingarm. Inside, you will find the final drive, which should be extracted and replaced with a new spare part; after replacement, reassemble all previously removed components.

Watch the video!


by ScegliAuto

More videos