Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
The procedure for changing the engine oil on the Benelli TRK 502X involves loosening the drain plug of the oil tank, located in the central lower part of the vehicle: once this plug is loosened, you can collect the oil in a suitably positioned container. When all the oil has drained out, you can top up by inserting the new oil through the breather located on the right side of the bike, at the top of the crankcase: once the top-up is complete, you can close everything by inserting the appropriate plug.

Updated on 2 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Engine Oil and Oil Filter on the Benelli Trk 502
How to Replace the Engine Oil and Oil Filter on the Benelli Trk 502
Trk 502 Today, learn how to replace the engine oil and oil filter on the Benelli Trk 502 motorcycle as part of routine maintenance. First, place the motorcyc…
How to Change Engine Oil and Oil Filter on Benelli TRK 502
How to Change Engine Oil and Oil Filter on Benelli TRK 502
Trk 502 In this guide, learn how to change the engine oil and oil filter as part of regular maintenance on a Benelli TRK 502. First, position the motorcycle …
How to Reset the Engine Light on a Benelli TRK 502
How to Reset the Engine Light on a Benelli TRK 502
Trk 502 Before you can begin, sit on the seat of your Benelli TRK 502. Start by setting the engine start switch to the active position. Then, fully rotate an…

How to Top Up the Oil in the Aprilia SR 50 R Scooter?

In this tutorial, you will see how to top up the oil in the Aprilia SR 50 R scooter, a very simple and quick operation to perform periodically. First, open the small lower compartment and retrieve the supplied tools, then remove the screws securing the front panel located at the back. Once removed, locate the oil reservoir, which is on your left, and unscrew the cap. At this point, proceed to top up the oil until you reach the optimal level, then reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos