Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Time on the Benelli 752S

Model: Benelli 752 S
Part: Clock

Video tutorial

In today's tutorial, learn how to change the time on the instrument panel of the Benelli 752S motorcycle by following these simple steps. First, place your motorcycle on the stand and press and hold the settings menu button; then turn on the instrument panel and wait for the clock display to start flashing, as shown in the video.

Now change the time format, followed by the hour and then the minutes; exit the settings menu to save all changes, then start the engine!


Updated on 11 September 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil in a Benelli 752 S
How to Change the Engine Oil in a Benelli 752 S
752 S As seen in this tutorial, changing the engine oil in a Benelli 752 S is an extremely simple and quick operation. Before proceeding, ensure that the e…
How to Replace Front Brake Pads on Benelli 752 S?
How to Replace Front Brake Pads on Benelli 752 S?
752 S To replace the front brake pads on the Benelli 752 S, loosen the screw located at the rear of the corresponding brake caliper so that it can be detac…
How to Replace the Levers on a Benelli 752 S?
How to Replace the Levers on a Benelli 752 S?
752 S To replace the levers on the Benelli 752 S, loosen the nut located at the bottom of the pin corresponding to the lever you intend to remove. Once the…

How to change the transmission oil on the Honda PCX 150 scooter?

In this tutorial, you will see how to change the transmission oil on the Honda PCX 150 scooter, a very simple and quick operation. First, ensure the engine is completely cold, then locate the three bolts at the end of the casing and position a container underneath them. Next, remove the two inner bolts using a 12 mm socket, clean them of any dirt, and allow all the oil in the system to drain out. At this point, tighten the lower bolt and, using a pump or syringe, add new oil through the upper hole.

Watch the video!


by ScegliAuto

More videos