Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil in a Benelli 752 S

Model: Benelli 752 S
Part: Engine oil

Video tutorial

As seen in this tutorial, changing the engine oil in a Benelli 752 S is an extremely simple and quick operation. Before proceeding, ensure that the engine is not excessively hot. Start by placing a container underneath the motorcycle, then locate the drain bolt, unscrew it, and let all the oil out of the system.

Next, unscrew the filter, install the replacement, and reassemble everything in reverse order. Finally, pour new oil through the designated fill hole.


Updated on 13 July 2026 by ScegliAuto


Related tutorials

How to Replace Front Brake Pads on Benelli 752 S?
How to Replace Front Brake Pads on Benelli 752 S?
752 S To replace the front brake pads on the Benelli 752 S, loosen the screw located at the rear of the corresponding brake caliper so that it can be detac…
How to Replace the Levers on a Benelli 752 S?
How to Replace the Levers on a Benelli 752 S?
752 S To replace the levers on the Benelli 752 S, loosen the nut located at the bottom of the pin corresponding to the lever you intend to remove. Once the…
How to Change the Time on the Benelli 752S
How to Change the Time on the Benelli 752S
752 S In today's tutorial, learn how to change the time on the instrument panel of the Benelli 752S motorcycle by following these simple steps. First, plac…

How to Change the Engine Oil on a Benelli 150

To change the engine oil on a Benelli 150, ensure the bike is on a stable surface, using the centre stand to keep it upright. Before starting, it's helpful to run the engine for a few minutes to warm the oil and facilitate drainage. Turn off the engine and locate the drain plug situated under the engine. Using an appropriate spanner, loosen the plug and position a container underneath to collect the used oil. Allow it to drain completely, ensuring all the liquid is removed. Once emptied, carefully re-tighten the plug, avoiding overtightening. Using a funnel, slowly pour new oil into the tank, checking the level with the dipstick or inspection window. When the level is correct, start the engine for a couple of minutes to circulate the new oil, then turn it off and check the level again, topping up if necessary.

Watch the video!


by ScegliAuto

More videos