Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Benelli Tnt 125
Part: Engine

The disassembly of the Benelli TnT 125 engine is carried out by loosening the screws that fix the engine block inside its housing, so that it can be completely removed. Subsequently, it will be possible to loosen the screws that fix the engine cylinder head, in order to completely remove the latter from its seat; in doing so, the screws that fix the two half casings must be unscrewed, accessing the internal components and eventually replacing them. After the replacement, it will be possible to close the engine again by fixing the casing screws and reinstalling the engine.

Posted on 9 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Engine Light on a Benelli TNT 125
How to Reset the Engine Light on a Benelli TNT 125
Tnt 125 Before you can begin, sit on the seat of your Benelli TNT 125. Start by activating the instrument panel by turning the key in the ignition switch, th…
How do you disassemble the engine of the Benelli TnT 125?
How do you disassemble the engine of the Benelli TnT 125?
Tnt 125 To disassemble the engine of the Benelli TnT 125, you need to start by loosening the screws that secure the engine block to its housing, then freeing…
How do you disassemble the engine of the Benelli TnT 125?
How do you disassemble the engine of the Benelli TnT 125?
Tnt 125 The engine of the Benelli TnT 125 can be disassembled by loosening the screws that secure it within its housing, allowing for its complete removal. A…

How to Replace the Transmission Oil on a Moto Guzzi Stelvio

In this video tutorial, you will learn how to replace the transmission oil on a Moto Guzzi Stelvio by following the instructions below. First, place your motorcycle on the centre stand and begin by unscrewing the drain screw located on the transmission using an Allen key; then allow the oil to drain into a container for about ten minutes, as shown in the video. At this point, unscrew the filler cap and pour in the new gearbox oil of the correct type (in this case, 80w90); fill the sump to the correct level!

Watch the video!


by ScegliAuto

More videos