Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel of a Bentley

Model: Bentley Bentayga MK 1 - Years 2018-2026
Part: Door trim panel

Removing the door panel of a Bentley is very simple. Today, you will learn how to do it quickly and practically, specifically, we will remove the left front door panel. Start by removing the two Torx screws located at the bottom of the door. Continue by removing the plastic cover near the dashboard to access more Torx screws. Also, remove the screw located inside the handle, then pull the entire panel from its place by first using a special tool for removing automotive parts and then pulling it upward. Once the panel is removed, disconnect the connector.

Updated on 12 September 2026 by ScegliAuto

Video tutorial

Related tutorials

The Most Interesting Feature of Bentley
The Most Interesting Feature of Bentley
Bentley Bentayga (2018-2026 / MK 1) In this video, you will see a truly interesting feature of Bentley; so interesting that it is rumored (but we cannot confirm, it is just hearsay from…
How to Replace the Key Fob Battery for the Bentley Bentayga
How to Replace the Key Fob Battery for the Bentley Bentayga
Bentley Bentayga (2018-2026 / MK 1) This guide will show you how to disassemble and replace the battery in the key fob for the Bentley Bentayga in simple steps. First, take your key fob…
Everything You Can't Do on a Bentley
Everything You Can't Do on a Bentley
Bentley Bentayga (2018-2026 / MK 1) In this video, we can only salivate at the wonders inside this $388,000 Bentley GT Speed. It's impossible to add any accessories because it has every…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos