Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this guide, you will find instructions to perform a full service on the Beta RR 125 enduro bike. First, drain the engine oil by unscrewing the bolt located at the bottom; then remove and clean (or replace) the small oil filter, as shown in the video. Next, replace the coolant by disconnecting the drain hose; unscrew the radiator cap to add the new coolant fluid. The tank is then removed to check the valves, following the video tutorial to the end!

Posted on 2 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Start a Beta RR 125
Rr 125 Begin by sitting on the rider's seat of your Beta RR 125. Next, insert the key into the ignition switch and turn it to activate the instrument panel.…
Replace the Engine Oil and Oil Filter on the Beta RR 125
Replace the Engine Oil and Oil Filter on the Beta RR 125
Rr 125 In today's tutorial, you will see how to perform routine maintenance by replacing the engine oil and oil filter on the Beta RR 125 enduro bike. First…
How do you replace the motor oil in the Beta RR 125?
How do you replace the motor oil in the Beta RR 125?
Rr 125 It will be possible to replace the motor oil of the Beta RR 125 by loosening the drain plug of the oil pan: this will be located in the central lower…

What Does the V-Belt Light Indicate on a Yamaha NMAX Scooter and How to Remove It?

If the V-BELT light has illuminated on the instrument cluster of your Yamaha NMAX scooter, it means it is time to replace the drive belt as it has exceeded the relevant interval. You can entrust this maintenance task to your trusted workshop; the cost will not be particularly excessive. Once this is done, you can manually reset the light by following the procedure shown in this tutorial. First, turn on the instrument cluster, then repeatedly press the left button on the dashboard to reach the service interval in question. At this point, press and hold the right button once to initialise the reset, and a second time to complete it.

Watch the video!


by ScegliAuto

More videos