Do it yourself
Frequently asked questions about cars and motorcycles
In today's guide, we'll see, in simple steps, how to remove the DB-Killer from a Beta RR 125 LC. First, get a special pliers for removing circlips and a pair of pointed pliers. Remove the retaining ring found inside the exhaust end can; then, use the pointed pliers to pull out the DB-Killer as shown in the video. Perform this operation only when the exhaust is cold and the engine is off; for reassembly, apply the reverse procedure of disassembly!

Updated on 28 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Rr 125 Lc This video shows how to remove the DB-Killer from a Beta RR 125. First, obtain the appropriate pliers to remove the circlips and insert them into the…
Rr 125 Lc .. Today we will see how to remove the DB-Killer from a Beta RR 125 LC in simple steps and without the use of special tools. Get a pair of pliers.. …
Rr 125 Lc This guide provides instructions for disassembling and replacing the chain, sprocket, and pinion of the Beta RR 125 LC enduro bike. First, place your…

How to Replace the Rear Shock Absorber on a Suzuki V-Strom 1000?

To replace the rear shock absorber on a Suzuki V-Strom 1000, loosen the bolts securing it to its housing, which is located in the central part of the motorcycle, just under the rear mudguard and above the rear swingarm. Once the upper and lower bolts of the shock absorber are loosened, it can be extracted from its housing and replaced with a new spare part. At this point, refit the new shock absorber in its housing to ensure everything functions correctly.

Watch the video!


by ScegliAuto

More videos