Do it yourself
Frequently asked questions about cars and motorcycles
Today we will see how to remove the DB-Killer from a Beta RR 125 LC in simple steps and without the use of special tools. Get a pair of pliers suitable for removing the circlips: then remove the clip found inside the exhaust silencer and subsequently use pointed pliers to extract the DB-Killer from the silencer, as illustrated in the video. Afterwards, we will hear the difference in sound when removing this component from the silencer. For reassembly, simply apply the reverse procedure of disassembly!

Updated on 29 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Rr 125 Lc In today's guide, we'll see, in simple steps, how to remove the DB-Killer from a Beta RR 125 LC. First, get a special pliers for removing circlips an…
Rr 125 Lc This video shows how to remove the DB-Killer from a Beta RR 125. First, obtain the appropriate pliers to remove the circlips and insert them into the…
Rr 125 Lc This guide provides instructions for disassembling and replacing the chain, sprocket, and pinion of the Beta RR 125 LC enduro bike. First, place your…

How to Replace the Air Filter on a Honda XL1000 Varadero?

In this tutorial, you will see how to replace the air filter on a Honda XL1000 Varadero, a very simple operation. First, remove the seat, then unscrew the two rear mounting bolts of the tank, the two front ones, and the remaining ones located on the sides. Once done, close the two fuel taps, disconnect the rubber hose, and lift the tank. At this point, you will have access to the filter box, which can be opened by removing the 8 screws around the perimeter. Once the filter is replaced, reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos