Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Number Plate Holder on Beta RR 50

Model: Beta Rr 50
Part:

Video tutorial

In this video, we will see how to disassemble and replace the number plate holder on a Beta RR 50 motorcycle in simple steps. First, unscrew the fixing screws of the number plate holder, which are located under the tail; then disconnect the various bulb wires to completely remove the number plate holder along with the indicators and the rear light.

At this point, remove the lights and bulbs and transfer everything to the new number plate holder; also remove the number plate by unscrewing any screws or grinding down the rivets and attach it to the new number plate holder. Apply the reverse procedure for reassembly!


Updated on 2 April 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Wheel of a Beta RR50
How to Remove the Rear Wheel of a Beta RR50
Rr 50 Before you start, head to the rear wheel and lift the bike slightly. Begin by loosening the fastening nut that adjusts the distance of the rear wheel…
How to Replace the Air Filter of a Beta RR 50
How to Replace the Air Filter of a Beta RR 50
Rr 50 Before you begin, position your Beta RR 50 vertically. Start by removing the seat by unscrewing the fixing screw. Next, unclip and remove the interna…
Replacing the Clutch Discs on the Beta RR 50
Replacing the Clutch Discs on the Beta RR 50
Rr 50 Today, we will explore the steps to remove and replace the clutch discs on the Beta RR 50 enduro bike. First, place the bike on a stand and begin dra…

How to Change the Engine Oil in the Triumph Tiger 1200 Rally Explorer

In this tutorial, you will see how to change the engine oil in the Triumph Tiger 1200 Rally Explorer, a very simple and quick operation. First, ensure that the engine is cool enough, then remove the lower protective cover, locate the drain hole bolt, and unscrew it using a 7mm hex key. Allow all the oil in the system to drain, unscrew the old filter, and tighten both the replacement and the bolt. At this point, simply pour the necessary amount of oil through the designated upper hole.

Watch the video!


by ScegliAuto

More videos