Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Beta Rr 300
Part: Air filter

A very important task to keep your bike healthy and reduce the number of parts replacements is to periodically wash the air filter. In a bucket, mix a good amount of universal degreaser (specific products are not necessary) with some water. Soak the filter for several minutes, then rinse it. Dry the filter as best as possible using a compressor or a standard air gun. Wait a couple of hours for it to dry further. Place the air filter back in a bucket with some engine oil and grease the edges before refitting it.

Updated on 5 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to change the transmission oil on a Beta RR 300
How to change the transmission oil on a Beta RR 300
Rr 300 Today, we will provide the main instructions for performing the routine maintenance service by changing the transmission oil and oil filter on the Be…
How do you replace the engine oil of the Beta RR 300?
How do you replace the engine oil of the Beta RR 300?
Rr 300 To perform the oil change on the Beta RR 300, you will need to loosen the drain plug of the oil pan located in the central lower part of the motorcyc…
How do you replace the motor oil of the Beta RR 300?
How do you replace the motor oil of the Beta RR 300?
Rr 300 To perform the oil change on the Beta RR 300, you need to loosen the drain plug located in the lower center of the vehicle: by loosening this plug, i…

How to Replace the Air Filter on a Honda XL1000 Varadero?

In this tutorial, you will see how to replace the air filter on a Honda XL1000 Varadero, a very simple operation. First, remove the seat, then unscrew the two rear mounting bolts of the tank, the two front ones, and the remaining ones located on the sides. Once done, close the two fuel taps, disconnect the rubber hose, and lift the tank. At this point, you will have access to the filter box, which can be opened by removing the 8 screws around the perimeter. Once the filter is replaced, reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos