Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Beta Rr 50
Part: Clock

To adjust the clock on the Beta RR 50, press both buttons located on either side of the display simultaneously until a menu appears. Use the same buttons to navigate through the menu until you reach "2 CLOCK". To select it, press the right button, and to modify the time, press the left button. Once the correct hour is selected with the left button, confirm with the right button and repeat the same operation for the minutes. When finished, to exit the menu, hold both buttons, noting that the time will have been changed in the main menu.

Updated on 20 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Adjusting the Carburetion on Beta RR 50
Rr 50 If your Beta is experiencing strange flat spots, especially uphill, it may be time to adjust the carburetion. To do this, remove the air filter manif…
How to Remove the Rear Wheel of a Beta RR50
How to Remove the Rear Wheel of a Beta RR50
Rr 50 Before you start, head to the rear wheel and lift the bike slightly. Begin by loosening the fastening nut that adjusts the distance of the rear wheel…
How do you disassemble the engine of the Beta RR 50?
How do you disassemble the engine of the Beta RR 50?
Rr 50 To disassemble the engine of the Beta RR 50, you need to loosen the fixing screws of the supports that hold the engine in its housing in the center o…

How to Replace the Engine Cover on a Honda CB 650R

This guide provides instructions for removing and replacing the engine cover on a Honda CB 650R motorcycle, following these simple steps. First, place your motorcycle on the centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes. Then, unscrew all the screws from the cover or engine casing found on the right, as shown in the video. At this point, install the new cover, ensuring to replace the gasket and clean the base thoroughly.

Watch the video!


by ScegliAuto

More videos