Do it yourself
Frequently asked questions about cars and motorcycles
To install the manual valve adjuster on the Beta RR 300, remove the valve cover located immediately next to the clutch casing on the right side of the bike. Once the casing is removed, take out the central part and insert the manual valve adjuster inside, which will protrude externally. At this point, position the cover back onto its housing and screw it in by tightening the appropriate side bolts. After installation, check the correct operation of the device.

Updated on 30 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Rr 300 This guide provides instructions to remove and replace the clutch discs on the Beta RR 300 enduro bike. First, remove the clutch cover by unscrewing …
Rr 300 Today, let’s discover how to perform routine maintenance by changing the transmission oil on the Beta RR 300 enduro bike. First, place your bike on a…
Rr 300 Below is the procedure for performing the routine maintenance service, changing the transmission oil on the Beta RR 300. First, place the bike on its…

How to Replace the Headlight Bulb on the Keeway RKS 125?

In this tutorial, we will see how to replace the headlight bulb on the Keeway RKS 125, a very simple and quick operation. First, ensure that the instrument panel is off to operate safely, then unscrew the two bolts of the handlebar using an Allen key. Next, unscrew the bolts located at the front of the instrument panel with a socket wrench, move the headlight unit forward and disconnect the power connector. At this point, simply remove the rubber cap, unclip the metal clip, replace the bulb, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos