Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In order to replace the exhaust pipe of the Beta Xtrainer, you need to loosen the screws that secure the rear panel of the motorcycle's fender, so that it can be removed from the right side of the vehicle: under this panel you will be able to locate the exhaust pipe, which must be freed from its supports by unscrewing the screws. Then you can proceed by widening the ring that connects the exhaust pipe to the exhaust manifold; the new one can then be inserted, securing it to the respective supports. Finally, you can check that everything works correctly by reinserting the side panel.

Posted on 12 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the exhaust pipe of the Beta Xtrainer?
How do you replace the exhaust pipe of the Beta Xtrainer?
Xtrainer On board the Beta Xtrainer, the replacement of the exhaust can be done by unscrewing the screws that fix the exhaust terminal to its housing, which i…
How do you replace the exhaust pipe of the Beta Xtrainer?
How do you replace the exhaust pipe of the Beta Xtrainer?
Xtrainer The operation of replacing the muffler on the Beta Xtrainer is carried out by loosening the screws that fix the exhaust terminal to its housing, whic…
How to Replace the Exhaust on a Beta Xtrainer
How to Replace the Exhaust on a Beta Xtrainer
Xtrainer The procedure for removing the exhaust on a Beta Xtrainer involves loosening the screws that secure the exhaust tip to its mounts: to locate these, y…

How to Replace the Spark Plug on a Piaggio Vespa SXL 125 Scooter?

In this tutorial, you will see how to replace the spark plug on a Piaggio Vespa SXL 125 scooter, a very simple and quick operation. Before proceeding, ensure that the key is not inserted for safety. Start by unscrewing the indicated screw and opening the small lower door, then disconnect the connector from the spark plug and begin unscrewing it using a long 16 mm socket. Once completely removed, insert the replacement and tighten it without applying excessive force, as it could be damaged. Finally, reconnect the connector and reposition the door.

Watch the video!


by ScegliAuto

More videos