Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In order to remove the instrument panel of the Beta 300 RR, you need to loosen the screws that secure the device to its housing, in the central part of the handlebar: once the screws holding the panel in place have been loosened, you can proceed by disconnecting the connectors located at the back of the device. This way you can completely remove the old instrument panel and insert the new one; this can be connected to the connectors and secured with the appropriate screws, in order to verify that everything is functioning properly.

Posted on 16 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Exhaust on the Beta 300 RR
How to Replace the Exhaust on the Beta 300 RR
300 Rr You can replace the exhaust on the Beta 300 RR by loosening the screws that secure the exhaust terminal to its housing: before doing this, you will n…
How to replace the clutch on the Beta 300 RR
How to replace the clutch on the Beta 300 RR
300 Rr To replace the clutch on the Beta 300 RR, loosen the bolts securing the cover on the right side of the bike, near the kickstarter. Once the bolts are…
How to Dismantle the Engine of the Beta 300 RR?
How to Dismantle the Engine of the Beta 300 RR?
300 Rr To dismantle the engine of the Beta 300 RR, loosen the bolts securing the engine block in its housing. Once the engine is free, extract it from its l…

How to Replace the Spark Plug on a Piaggio Vespa SXL 125 Scooter?

In this tutorial, you will see how to replace the spark plug on a Piaggio Vespa SXL 125 scooter, a very simple and quick operation. Before proceeding, ensure that the key is not inserted for safety. Start by unscrewing the indicated screw and opening the small lower door, then disconnect the connector from the spark plug and begin unscrewing it using a long 16 mm socket. Once completely removed, insert the replacement and tighten it without applying excessive force, as it could be damaged. Finally, reconnect the connector and reposition the door.

Watch the video!


by ScegliAuto

More videos