Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Bmw S1000r
Part: Brake pads

In this tutorial we can see how to replace the rear brake pads on the BMW S 1000 R, a very simple and quick operation. First of all, position yourself in front of the brake in question, then locate the metal clip located in the upper area of the brake itself and release it using pliers. Next, remove the pin, remove the old pads and clean any dirt residue present. At this point, all that remains is to compress the caliper pistons, insert the replacement pads and reassemble everything following the reverse procedure.

Posted on 6 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the brake pads of the BMW S1000 R?
How do you replace the brake pads of the BMW S1000 R?
S1000r The brake pads of the BMW S1000 R can be replaced by loosening the screws that secure the brake caliper corresponding to its housing: once the calipe…
Replacing the front brake pads on the BMW S1000 R
Replacing the front brake pads on the BMW S1000 R
S1000r In today's video, you will see how to remove and replace the front brake pads on a BMW S1000 R, following the instructions below. First, unscrew the …
How to Remove the Front Wheel of the BMW S 1000 R?
How to Remove the Front Wheel of the BMW S 1000 R?
S1000r To remove the front wheel of the BMW S 1000 R, loosen the side nut that secures the central axle of the wheel, located on both sides of the fork. Onc…

How to Replace the Air Filter on a Honda CB500X?

Replacing the air filter on the Honda CB500X, as shown in this tutorial, is a very simple and quick operation. First, remove the seat, then loosen the nut securing the negative terminal of the battery, disconnect it, and repeat the process for the positive terminal. Next, detach the upper strap, remove the battery, and unscrew the 4 screws securing the airbox cover. Once opened, you can extract the old filter, remove any residue present in the housing, and fit the new part.

Watch the video!


by ScegliAuto

More videos