Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the BMW F800GS

Model: Bmw F800gs
Part: Service warning light

Video tutorial

After replacing the battery on some BMW F800gs models, it may happen that the service light or the brake light comes on. In these cases, it is necessary to perform a small reset of the motorcycle's onboard computer. To perform the reset, we must: - start the engine; - press the brake; - press the accelerator three times; After performing these steps, the light will turn off and to complete the reset, it will be necessary to turn off and turn on the motorcycle.

If the light does not go off, it may be necessary to go to the workshop for a computerized diagnosis.


Posted on 6 April 2025 by ScegliAuto


Related tutorials

How to Reset the Service Light on a BMW F800GS
How to Reset the Service Light on a BMW F800GS
F800gs To reset the Service light on a BMW F800GS, there is no procedure that can be done independently: you will need to connect a diagnostic tool to the v…
Replacing the Front Headlight Bulb on a BMW F800GS
Replacing the Front Headlight Bulb on a BMW F800GS
F800gs In today's video tutorial, you will learn how to remove and replace the front headlight bulb on a BMW F800GS in simple steps. First, remove the prote…
How to Replace the Front Headlight on the BMW F800GS
How to Replace the Front Headlight on the BMW F800GS
F800gs In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key i…

How to Replace the Handlebars on the Ducati Scrambler

This guide provides instructions on how to remove and replace the handlebars on the Ducati Scrambler motorcycle, following the steps outlined below. First, place the bike on its centre stand and begin removing the grips by unscrewing the screws and taking off the bar ends; then unscrew the handlebar mounting screws to remove the handlebars, as shown in the video. At this point, correctly install the new handlebars to ensure they are centred; then reassemble and secure the grips and side bar ends, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos