Do it yourself
Frequently asked questions about cars and motorcycles

Model: Bmw R1200 Rt
Part: Key

In this tutorial, we can see how to replace the battery of the BMW R1200 RT remote control, an extremely simple and quick operation. To do this, we will need a replacement battery of type CR2032 and, if necessary, a small screwdriver with a flat tip. First of all, extend the metal key by pressing the appropriate button, then lever along the indicated edge and remove the rear cover. At this point, all that remains is to remove the old battery, insert the replacement respecting the polarity, and reassemble everything following the reverse procedure.

Posted on 1 November 2025 by ScegliAuto

Video tutorial

Related tutorials

R1200 Rt In this tutorial, see how to replace the remote battery of the BMW R1200 RT, a very simple and quick operation. You will need a replacement CR2032 ba…
R1200 Rt Replacing the remote battery of the BMW R1200 RT, as shown in this tutorial, is an extremely simple and quick operation. For this, you will need a re…
R1200 Rt This guide outlines the steps to remove and replace the battery of the BMW R1200 RT. First, remove the rider's seat; you will find the battery undern…

How to Service the Piaggio Vespa GTS 300

This brief guide will illustrate the main steps to perform the routine maintenance service on the Piaggio Vespa GTS 300, replacing the engine oil and oil filter. First, place the scooter on the centre stand and start by unscrewing the oil drain bolt found under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge using the appropriate tool, and hand-tighten the new one. Finally, unscrew the filler cap and top up, filling to the maximum level mark!

Watch the video!


by ScegliAuto

More videos