Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Bmw R1200 Rt
Part: Key

In this tutorial, see how to replace the remote battery of the BMW R1200 RT, a very simple and quick operation. You will need a replacement CR2032 battery and, if necessary, a small flathead screwdriver. First, extend the emergency metal key by pressing the appropriate button, then leverage the newly freed slot to unlock the rear cover. Next, remove the old battery, insert the replacement while respecting the polarity, and follow the reverse procedure to reassemble everything.

Updated on 29 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Remote Battery of the BMW R1200 RT?
How to Replace the Remote Battery of the BMW R1200 RT?
R1200 Rt Replacing the remote battery of the BMW R1200 RT, as shown in this tutorial, is an extremely simple and quick operation. For this, you will need a re…
How to Replace the Battery of the BMW R1200 RT
How to Replace the Battery of the BMW R1200 RT
R1200 Rt This guide outlines the steps to remove and replace the battery of the BMW R1200 RT. First, remove the rider's seat; you will find the battery undern…
How to replace the battery of the BMW R1200 RT remote control?
How to replace the battery of the BMW R1200 RT remote control?
R1200 Rt In this tutorial, we can see how to replace the battery of the BMW R1200 RT remote control, an extremely simple and quick operation. To do this, we w…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos