Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Air Filter on a BMW K1600 GTL

Model: Bmw K1600 Gtl
Part: Air filter

Video tutorial

Replace the air filter on a BMW K1600 GTL. Follow this guide video for the replacement procedure. Position the motorcycle on the centre stand, and using a screwdriver, unscrew the fastening screws of the grey fairing on the right and left; remove the tank cover along with the seat.

After removing the container screws, lift the air filter container. Install a new one if damaged or reposition the same after cleaning it. Finally, close the air filter container and reassemble all the plastics.


Updated on 8 March 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter on the BMW K1600 GTL
How to Replace the Air Filter on the BMW K1600 GTL
K1600 Gtl To replace the air filter on the BMW K1600 GTL, loosen the screws that secure the side panels near the fuel tank: once these are completely detached,…
How do you replace the air filter of the BMW K1600 GTL?
How do you replace the air filter of the BMW K1600 GTL?
K1600 Gtl To replace the air filter on the BMW K1600 GTL, you need to unscrew the screws that hold the side fairings of the motorcycle, which will be located n…
How to Replace the Headlight Bulb on the BMW K1600 GTL?
How to Replace the Headlight Bulb on the BMW K1600 GTL?
K1600 Gtl To replace the headlight bulb on the BMW K1600 GTL, loosen the screws securing the headlight fairing. Once these screws, located on the sides of the …

How to change the engine oil of a Yamaha MT-07?

To change the engine oil of a Yamaha MT-07, follow these steps. Start by placing the bike on a flat surface and ensure the engine is warm but not too hot. Remove the oil cap from the top of the engine and unscrew the oil drain plug on the engine casing, usually located on the underside of the engine. Position a collection container under the drain plug and unscrew the plug to completely drain the used oil. Once drained, refit the drain plug. Remove and replace the oil filter using an oil filter spanner. Apply a little new oil to the seal of the new filter before installation. Fill the engine with new oil through the oil opening until reaching the recommended level. Check the oil level using the dipstick and add oil if necessary. Refit the oil cap and ensure it is securely tightened. Start the engine and let it run for a few minutes to distribute the oil, and you will have completed the procedure.

Watch the video!


by ScegliAuto

More videos