Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Use the Keyless Ride System on a BMW GS

Model: BMW BMW Various
Part: Key

Video tutorial

The Keyless Ride system is a marvel as it saves you from having to take out the key every time. Just have the electronic key in your pocket or backpack, approach the bike, press the ignition button, and off you go, the dashboard lights up. This type of key also allows you to open the fuel tank and contains a small mechanical key inside, which is used to detach the seat or remove the satnav.

If the key is too far away, the bike won't start, so be careful! If the key battery runs low, there is an NFC chip to unlock everything by bringing it close to the sensor under the rear mudguard. This type of key works with flat CR2032 batteries, which is always good to have on hand.


Posted on 1 February 2026 by ScegliAuto


Related tutorials

How to use the automatic transmission in BMW vehicles
How to use the automatic transmission in BMW vehicles
BMW BMW Various Today we will explain how to use the automatic transmission on BMW vehicles. Its use is very simple, just focus on the use of the letters; on the gea…
How to use the emergency call system of BMW
How to use the emergency call system of BMW
BMW BMW Various The emergency call button has been introduced on BMW vehicles so that in the event of a more or less serious accident, the driver can call for help o…
How to deactivate the automatic steering of the Lane Assist system in a BMW?
How to deactivate the automatic steering of the Lane Assist system in a BMW?
BMW BMW Various In this tutorial, you will see how to deactivate the automatic steering of the Lane Assist system in a BMW, a very simple and quick operation, for ex…

How to Change the Engine Oil on a Benelli 150

To change the engine oil on a Benelli 150, ensure the bike is on a stable surface, using the centre stand to keep it upright. Before starting, it's helpful to run the engine for a few minutes to warm the oil and facilitate drainage. Turn off the engine and locate the drain plug situated under the engine. Using an appropriate spanner, loosen the plug and position a container underneath to collect the used oil. Allow it to drain completely, ensuring all the liquid is removed. Once emptied, carefully re-tighten the plug, avoiding overtightening. Using a funnel, slowly pour new oil into the tank, checking the level with the dipstick or inspection window. When the level is correct, start the engine for a couple of minutes to circulate the new oil, then turn it off and check the level again, topping up if necessary.

Watch the video!


by ScegliAuto

More videos