Do it yourself
Frequently asked questions about cars and motorcycles

Model: Bmw 1200gs
Part:

Remove the grip cover on a BMW 1200 GS motorcycle. This is a simple and quick task that you can do yourself using a flat-head screwdriver and a pair of scissors. First, lay the motorcycle down and insert the flat-head screwdriver into the grip cover to lift one of the edges. Using the pointed scissors, cut the grip cover. After completing these steps, you can perform checks and maintenance on the grip or replace the grip cover. Fitting the new cover may seem complex, but using an oil-based spray will help you fit it easily.

Posted on 26 March 2026 by ScegliAuto

Video tutorial

Related tutorials

1200gs As with any maintenance operation on a motorcycle, secure your BMW 1200 GS safely on its stand. This is advisable to ensure the operator's safety. At…
1200gs If the clock on your BMW 1200 GS displays the incorrect time and you want to change it manually, follow this mini guide. First, insert the key and tu…
1200gs To replace the clutch on the BMW 1200GS, loosen the screws securing the cover that contains it: this is located on the right side of the bike, at the…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos