Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Bmw 1200gs
Part: Clutch

To replace the clutch on the BMW 1200GS, loosen the screws securing the cover that contains it: this is located on the right side of the bike, at the front. Once the screws are loosened, you can open the cover to remove the old clutch from inside by unscrewing the appropriate screws. When the old clutch is removed, insert the new one into its housing and secure it with its screws, then cover it with the corresponding side cover.

Updated on 14 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Brake Pads on the BMW 1200GS?
How to Replace the Brake Pads on the BMW 1200GS?
1200gs To replace the brake pads on the BMW 1200GS, remove the caliper pin by levering it out with a screwdriver. This should then be lightly tapped to remo…
Removing the Engine Air Filter on a BMW 1200Gs
Removing the Engine Air Filter on a BMW 1200Gs
1200gs Remove the engine air filter on a BMW 1200Gs. Follow this guide video to proceed with the replacement. Position the motorcycle on a central stand, un…
Fitting Heated Grips on a BMW 1200 GS
Fitting Heated Grips on a BMW 1200 GS
1200gs As with any maintenance operation on a motorcycle, secure your BMW 1200 GS safely on its stand. This is advisable to ensure the operator's safety. At…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos