Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Brake Pads on the BMW 1200GS?

Model: Bmw 1200gs
Part: Brake pads

Video tutorial

To replace the brake pads on the BMW 1200GS, remove the caliper pin by levering it out with a screwdriver. This should then be lightly tapped to remove it from the rear and slide it out. At this point, insert the screwdriver inside the caliper, leveraging against the pads to push them out. Be careful not to lever against the disc, as it is very fragile.

When the old pads have been extracted, you can insert the new pads. Finally, reinsert the pin that was previously removed.


Updated on 20 April 2026 by ScegliAuto


Related tutorials

1200gs Remove the engine air filter on a BMW 1200Gs. Follow this guide video to proceed with the replacement. Position the motorcycle on a central stand, un…
1200gs To replace the clutch on the BMW 1200GS, loosen the screws securing the cover that contains it: this is located on the right side of the bike, at the…
1200gs Remove the grip cover on a BMW 1200 GS motorcycle. This is a simple and quick task that you can do yourself using a flat-head screwdriver and a pair …

How to Remove the Front Wheel of the Ducati Panigale 1299

Today, we will discover the necessary instructions to remove and replace the front wheel and tyre of the Ducati Panigale 1299. First, place your bike on a stand and begin loosening the central axle of the wheel; then, use the front stand to lift the wheel off the ground, as shown in the video. Next, unscrew the bolts securing the front brake calipers to remove them from the disc; remove the wheel nut to take off the wheel, and if necessary, replace the tyre, then reassemble everything!

Watch the video!


by ScegliAuto

More videos