Do it yourself
Frequently asked questions about cars and motorcycles

Model: Bmw 1200gs
Part: Air filter

Remove the engine air filter on a BMW 1200Gs. Follow this guide video to proceed with the replacement. Position the motorcycle on a central stand, unscrew the securing screws at the front of the tank, and remove the plastics as shown in the video. Using a screwdriver, unscrew the securing screws of the container, remove the cap and take out the air filter. Fit a new one if damaged or reposition the same after cleaning it (use an air compressor). Finally, close the air filter container and replace the plastics over the tank.

Updated on 9 March 2026 by ScegliAuto

Video tutorial

Related tutorials

1200gs To replace the brake pads on the BMW 1200GS, remove the caliper pin by levering it out with a screwdriver. This should then be lightly tapped to remo…
1200gs To replace the clutch on the BMW 1200GS, loosen the screws securing the cover that contains it: this is located on the right side of the bike, at the…
1200gs As with any maintenance operation on a motorcycle, secure your BMW 1200 GS safely on its stand. This is advisable to ensure the operator's safety. At…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos